12

BLUE SEA® SYSTEMS - DUAL POWERPOST CABLE CONNECTOR - Stud: 1-5/16" & 1⅜-16

Provides a termination point for extending the length of outboard harnesses or other conductors.  • Designed for connecting high amperage~ conductors. • 2018 is also designed for outboard engine installation when factory cables need to...

BLUE SEA® SYSTEMS - POWERPOST CABLE CONNECTOR - Stud: ⅜" x ⅞" Size: 3.30" X 1.75"

Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum. Posts have no amperage rating because amperage flows between terminals stacked on the post and is determined by the wire and terminals used.  Stud: ⅜"...

BLUE SEA® SYSTEMS - POWERPOST CABLE CONNECTOR - Stud: 5/16" x ⅞" Size: 3.30" X 1.75"

Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum. Posts have no amperage rating because amperage flows between terminals stacked on the post and is determined by the wire and terminals used.  Stud: 5/16"...

BLUE SEA® SYSTEMS - ST-BLADE BATTERY TERMINAL MOUNT FUSE BLOCK - Description: ATO / ATC Fuse Block Kit Amps: 30

Easy to install 4 ATO®/ATC® fused circuit mounts directly on the battery terminal studs. Screw terminals for securing wires with insulated ring terminals and covers included.  • Screw terminals for securing wires. • Accepts...

BLUE SEA® SYSTEMS - BATTERY TERMINAL MOUNT BUSBARS

Tin plated copper bus handles voltage up to 32VDC and is rated for 100 Amps. #8-32 Screw terminals w/captive star lock washers ensure a good connection.  

BLUE SEA® SYSTEMS - E SERIES BATTERY SWITCH - Type: ON-OFF

350 Ampere continuous rating for inboard gasoline and diesel engines. One-piece tin-plated copper stud design never loosens over time. Terminal studs accept⅜" or M10 ring terminals. Ignition protected and UL Listed. Selector features make-before-break...

BLUE SEA® SYSTEMS - E SERIES BATTERY SWITCH - Type: 1, 2, Both, Off

350 Ampere continuous rating for inboard gasoline and diesel engines. One-piece tin-plated copper stud design never loosens over time. Terminal studs accept⅜" or M10 ring terminals. Ignition protected and UL Listed. Selector features make-before-break...

BEP Marine - 701-S MINI BATTERY SELECTOR SWITCH - Mount: Surface or Recessed Volts: 6-48 Size: 2¾" x 2¾" x 3"

4 POSITION -OFF/1/BOTH/2 The 701-S is the most compact selector switch available on the market. Housed in the same manner as the 701 and includes the same removable side plates and back cover. While BEP Marine foremost recommends isolated battery...

BEP Marine - 701 SURFACE OR RECESS MOUNTED CONTOUR MANUAL BATTERY MASTER SWITCH - Mount: Surface or Recessed Volts: 6-48 Size: 2¾" x 2¾" x 3"

• Compact, lightweight. • Removable key. • Countersunk recesses for surface mount application. • Standard 21/is' (52 mm) hole cut out (standard gauge hole). • Inside: captive inserts for%' (4.8 mm) nuts providing full access...

SEACHOICE® - 4-POSITION BATTERY SELECT SWITCH WITHOUT LOCK - Size: 5½" Dia. x 2⅝"

• Permits selection between two batteries for starting, charging, or operating both batteries in parallel. • For 6, 12, 24 or 36 volt systems. • 230 Amps continuous, 345 amps momentary (5 minutes). • Surface or rear mount. •...

SEACHOICE® - 2-POSITION BATTERY SELECT SWITCH WITHOUT LOCK - Size: 5½" Dia. x 2⅝"

• For 6, 12, 24 or 36 volt systems. • 230 Amps continuous, 345 amps momentary (5 minutes). • Surface or rear mount. • Conforms to US Coast Guard standards for ignition protection. • Positive click-stop on all positions...

MEGAWARE - Battery Guardâ„¢

PROLONG THE LIFE OF YOUR BATTERY  Megaware BatteryGuard™ Sits Under Your Battery and Absorbs the Gravity Shock Caused by Excessive Vibration and Up and Down Bounce  • Reduces up to 80% of the G·shock Caused by Excessive...