Electrical

SEA-DOG® LINE - LED PUSH BUTTON ON/OFF SWITCH - A: ⅞" B: ⅞" C: ¾" Amps: 5 Max Volts: 12/24

Constructed of formed 304 stainless steel. Prewired for ease of installation. Typically wired so LED ring lights up blue when circuit is energized by pushing the center button. IP65 rating.  A: ⅞" B: ⅞" C: ¾" Amps: 5 Max...

BLUE SEA® SYSTEMS - CONTURA® SWITCH REPLACEMENT ACTUATOR - Description: Single lens Color: Black

Directly replaces actuators found on all Blue Sea contura waterproof panels and any water resistant contura switch. Constructed of thermal plastic polycarbonate with hard nylon surface overlay.  Description: Single lens Color: Black

BLUE SEA® SYSTEMS - AGC/MDL FUSE HOLDER - Description: Fuse Holder w/ Knurled Cap

• For use with AGC® or MDL® glass fuses. • Rated IP66 on front - protected against powerful water jets. • 20A Max. fuse amperage. • 0.50" (12.70 mm) mounting hole. • Fuse sold separately. Description: Fuse...

BLUE SEA® SYSTEMS - WATER RESISTANT DC CIRCUIT BREAKER PANELS - Size: 9⅜" x 4¼" H Positions: 8 Mount: Horizontal Color: Black

Designed for flybridge and open cockpit applications. Rated IP66 - "Use on Shipdecks". Installed switch is On/Off. Features push button circuit breakers with waterproof boot, countersunk mounting holes throughout, heavy ⅛ aluminum material two-part...

BLUE SEA® SYSTEMS - WATER RESISTANT DC CIRCUIT BREAKER PANELS - Size: 5¼" x 4¼" Positions: 4 Mount: Horizontal Color: Black

Designed for flybridge and open cockpit applications. Rated IP66 - "Use on Shipdecks". Installed switch is On/Off. Features push button circuit breakers with waterproof boot, countersunk mounting holes throughout, heavy ⅛ aluminum material two-part...

BLUE SEA® SYSTEMS - ATO/ATC ST BLADE FUSE BLOCK SYSTEM - Gang: 12 Fuse: ATO/ATC Neg Bus: YES Size: 3.32" x 6.47''

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100...

BLUE SEA® SYSTEMS - ATO/ATC ST BLADE FUSE BLOCK SYSTEM - Gang: 6 Fuse: ATO/ATC Neg Bus: YES Size: 3.32" x 4.89"

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100...

BLUE SEA® SYSTEMS - MAXIBUS 250 AMP COMMON BUS - Gang: 4 Stud: 5-16"x18 Length: 5⅞"

Designed for heavy duty positive or negative busing. Features tin-plated copper bus and stainless steel hardware. 300V AC/ 48V DC maximum voltage. 250A AC/ 250A DC continuous amperage rating.  Gang: 4 Stud: 5-16"x18 Length: 5⅞"

BLUE SEA® SYSTEMS - DUALBUS PLUS 150 AMP COMMON BUS - Gang: 5 Stud: ¼"-20 Terminal Screw: #10-32

Combines negative and positive busses on one block, clear lexan lid snaps on to meet CG and ABYC insulation requirements. Features tin-plated copper bus and stainless steel hardware. Maximum Voltage 300V AC / 48V DC. Continuous Rating The maximum current...

SEACHOICE® - BUSBAR 150 AMP COMMON BUS - Gang: 10 Stud: ¼"-20 Terminal Screw: #8-32

Industry standard BusBar features tin-plated copper bus, ¼" stainless steel studs and 8-32 terminal screws. Continuous rating 150 Amps AC/DC maximum voltage 300 Volts AC, 48 Volts DC.  Gang: 10 Stud: ¼"-20 Terminal Screw: #8-32 

SEACHOICE® - DUALBUS 100 AMP COMMON BUSBAR - Gang: 5 Terminal Screw: #8-32

Combine negative and positive buses on one block. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 amps. Maximum 48V DC / 30DV AC. Gang: 5 Terminal Screw: #8-32 

SEACHOICE® - MINIBUS 100 AMP COMMON BUS - Gang: 5 Stud: #10-32 Terminal Screw: #8-32

Great for limited space applications in electronics cabinets and under dashboards. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 Amps and maximum volts of 48DC / 300V AC.  Gang: 5 Stud: #10-32 Terminal...