Props and Anodes

Camp Zinc 1/4 Inch x 2 Inch Pencil Anode With Bronze Plug - 1/8" NPT Thread

Size: 1/4" x 2"  Plug thread size: 1/8"  NPT Material: Zinc

Turning Point Hustler 3-Blade SS Prop for 4-3/4" Gearcase, 15.6" x 17" - RH

Material: Stainless Steel RH rotation  Size: 15.6" Dia. x 17" Pitch  Hustler 200-300+hp for 4-3/4" gearcase   MaxSpeed Dyno balance processes  Proprietary stainless steel, TP17 Performance tuned pitch, rake angles, and exhaust...

Turning Point Hustler 3-Blade SS Prop for 4-3/4" Gearcase, 15.6" x 15" - RH

Material: Stainless Steel RH rotation  Size: 15.6" Dia. x 15" Pitch  Hustler 200-300+hp for 4-3/4" gearcase   MaxSpeed Dyno balance processes  Proprietary stainless steel, TP17 Performance tuned pitch, rake angles, and exhaust...

Turning Point Hustler 3-Blade SS Prop for 4-3/4" Gearcase, 14.25" x 17" - RH

Material: Stainless Steel RH rotation  Size: 14.25" Dia. x 17" Pitch  Hustler 90-300+hp for 4-3/4" gearcase   MaxSpeed Dyno balance processes  Proprietary stainless steel, TP17 Perfromance tuned pitch, rake angles, and exhaust...

Turning Point Hustler 4-Blade SS Prop for 4-3/4" Gearcase, 14.5" x 17" - RH

Material: Stainless Steel RH rotation  Size: 14.5" Dia. x 17" Pitch  Hustler 90-300+hp for 4-3/4" gearcase   MaxSpeed Dyno balance processes  Proprietary stainless steel, TP17 Express Mach4 Dual Geometry is uniquely Engineered...

Turning Point Hustler 3-Blade SS Prop for 4-1/4" Gearcase, 13.25" x 17" - RH

Material: Stainless Steel RH rotation  Size: 13.25" Dia. x 17" Pitch  Hustler 90-300+hp for 4-3/4" gearcase   MaxSpeed Dyno balance processes  Proprietary stainless steel, TP17 Perfromance tuned pitch, rake angles, and exhaust...

Turning Point Hustler 3-Blade SS Prop for 4-1/4" Gearcase, 13.75" x 15" - RH

Material: Stainless Steel RH rotation  Size: 13.75" Dia. x 15" Pitch  Hustler 90-300+hp for 4-3/4" gearcase   MaxSpeed Dyno balance processes  Proprietary stainless steel, TP17 Perfromance tuned pitch, rake angles, and exhaust...

Martyr Magnesium 3-3/4" Rudder & Trim Tab Anode with Allen Screw

Magnesium for use in fresh water Size: 3-3/4" dia. x 1/2"   For rudder and trim tab 

Martyr Aluminum 3-3/4" Rudder & Trim Tab Anode with Allen Screw

Aluminum for use in brackish water  Size: 3-3/4" dia. x 1/2"   For rudder and trim tab 

Martyr 1/2" NPT Thread Zinc Engine Pencil Anode with Brass Plug

Size: 5/8" x 2"  Plug thread size: 1/2" NPT  UNC: 7/16" Material : Zinc

Camp Zinc 1-7/8 Inch Diameter Rudder Anode - 3/4 Inch Fastener

Size: 1-7/8" dia.  Fastener 3/4"  Material: Zinc

Camp Zinc Anodes 3/8 Inch x 1-3/4 Inch Zinc Sacrificial Pencil Anode Only

Size: 3/8" x 1-3/4"  Material: zinc  Plug not included