Electrical

SEACHOICE® - MINIBUS 100 AMP COMMON BUS - Gang: 5 Stud: #10-32 Terminal Screw: #8-32

Great for limited space applications in electronics cabinets and under dashboards. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 Amps and maximum volts of 48DC / 300V AC.  Gang: 5 Stud: #10-32 Terminal...

SEACHOICE® - TERMINAL BLOCK - Gang: 6 Amps: 30 Fastener: #8

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits. Tin-Plated Brass.  Gang: 6 Amps: 30 Fastener: #8

SEACHOICE® - TERMINAL BLOCK - Gang: 4 Amps: 30 Fastener: #8

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits. Tin-Plated Brass.  Gang: 4 Amps: 30 Fastener: #8

SEACHOICE® - TERMINAL BLOCK - Gang: 4 Amps: 20 Fastener: #6

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits. Tin-Plated Brass.  Gang: 4 Amps: 20 Fastener: #6

BLUE SEA® SYSTEMS - DUAL POWERPOST CABLE CONNECTOR - Stud: 1-5/16" & 1⅜-16

Provides a termination point for extending the length of outboard harnesses or other conductors.  • Designed for connecting high amperage~ conductors. • 2018 is also designed for outboard engine installation when factory cables need to...

BLUE SEA® SYSTEMS - POWERPOST CABLE CONNECTOR - Stud: ⅜" x ⅞" Size: 3.30" X 1.75"

Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum. Posts have no amperage rating because amperage flows between terminals stacked on the post and is determined by the wire and terminals used.  Stud: ⅜"...

BLUE SEA® SYSTEMS - POWERPOST CABLE CONNECTOR - Stud: 5/16" x ⅞" Size: 3.30" X 1.75"

Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum. Posts have no amperage rating because amperage flows between terminals stacked on the post and is determined by the wire and terminals used.  Stud: 5/16"...

BLUE SEA® SYSTEMS - E SERIES BATTERY SWITCH - Type: 1, 2, Both, Off

350 Ampere continuous rating for inboard gasoline and diesel engines. One-piece tin-plated copper stud design never loosens over time. Terminal studs accept⅜" or M10 ring terminals. Ignition protected and UL Listed. Selector features make-before-break...

BEP Marine - 701 SURFACE OR RECESS MOUNTED CONTOUR MANUAL BATTERY MASTER SWITCH - Mount: Surface or Recessed Volts: 6-48 Size: 2¾" x 2¾" x 3"

• Compact, lightweight. • Removable key. • Countersunk recesses for surface mount application. • Standard 21/is' (52 mm) hole cut out (standard gauge hole). • Inside: captive inserts for%' (4.8 mm) nuts providing full access...

SEACHOICE® - 4-POSITION BATTERY SELECT SWITCH WITHOUT LOCK - Size: 5½" Dia. x 2⅝"

• Permits selection between two batteries for starting, charging, or operating both batteries in parallel. • For 6, 12, 24 or 36 volt systems. • 230 Amps continuous, 345 amps momentary (5 minutes). • Surface or rear mount. •...

SEACHOICE® - 2-POSITION BATTERY SELECT SWITCH WITHOUT LOCK - Size: 5½" Dia. x 2⅝"

• For 6, 12, 24 or 36 volt systems. • 230 Amps continuous, 345 amps momentary (5 minutes). • Surface or rear mount. • Conforms to US Coast Guard standards for ignition protection. • Positive click-stop on all positions...

MINN KOTA® - TROLLING MOTOR POWER CENTER - Description: Power Center Battery Box

Ideal for small boat, transom applications (boats that do not have battery compartments). Features easy access external battery terminals that allow trolling motor, oth~r accessory leads, and charger leads to be connected without opening the box...