Engine

Universal Speedometer Pick Up Pitot for Boats - Water Pressure Type up to 80 MPH

Replaces most pitot tubes The slotted mounting plate means no drilling for most replacement installments Works on all marine speedometers using water pressure Steady pressure gives accurate readings Kick-up features prevents breakage if you hit...

Universal Speedometer Pick Up Pitot with Tubing Water Pressure Type Speedometers

Kit includes speedometer pitot, 20 ft of PVC tubing, black plastic clam shell vent, (4) black plastic tubing holders and (6) stainless steel self tapping screws Pitot replaces most pitot tubes The slotted mounting plate means no drilling for most...

100 ft Speedometer Pitot Tubing for Boats - Water Pressure Type Speedometers

Non-reinforced vinyl tubing for connection between speedometer pick up (pitot) and speedometer Tubing ID: 4mm Tubing OD: 6.2mm Length: 100 ft

Oil Pressure Sending Unit for Boats - Up to 80 PSI / 5 Bar Pressure Reading

Reads oil pressure up to 80 PSI / 5 Bar 10-32 stud terminal connector 1/8" - 27 NPTF threads Grounds through threads Sender has tapered threads and should not be used with thread seal tape or pipe sealant as this will interfere with grounding and...

Water Temperature Sending Unit for Boats - Up to 250 Degree Temperature Reading

Reads temperatures up to 250 degrees Fahrenheit 0.250" spade terminal connector 1/8" - 27 NPTF threads Grounds through threads Sender has tapered threads and should not be used with thread seal tape or pipe sealant as this will interfere with...

2-1/16 Inch Black Gauge Hole Cover Blank for Boats

Black color High impact plastic construction Snaps into place - no fasteners needed For quick and easy concealment of holes on deck or instrument panels Fits into a 2-1/16" hole

Black Faced Rectangular Hourmeter Gauge with Black Bezel for Boats

Black face with white lettering Black bezel Indicates 1/10 hour reading up to 9,999 hours High impact polycarbonate case Polarity insensitivity prevents installation errors Flush mount using 2 screws (not included) Meets NEMA and SAE...

Black Faced Round Hourmeter Gauge with Black Bezel for Boats

Black face with white lettering Black bezel Indicates 1/10 hour reading up to 9,999 hours High impact polycarbonate case Polarity insensitivity prevents installation errors Flush mount flange Meets NEMA and SAE specifications Fits into a 2-1/16"...

Black Faced Round Hourmeter Gauge with Chrome Bezel for Boats

Black face with white lettering Chrome bezel Indicates 1/10 hour reading up to 9,999 hours High impact polycarbonate case Polarity insensitivity prevents installation errors Flush mount flange Meets NEMA and SAE specifications Fits into a...

6 Terminal 3 Position Push to Choke Outboard Ignition Switch for Boats

Plastic construction Plastic face nut 3 positions: Off - Ignition - Start Push to choke 6 screw terminals labeled B (battery) - I (ignition) - S (start) - M (magneto) - M (magneto / ground) - C (choke) Ignition circuit rated 15 Amps @ 12...

3 Position 6 Wire Push to Choke Outboard Ignition Switch for Boats

Plastic construction Plastic face nut 3 positions: Off - Ignition - Start Push to choke 6 wires - Red (battery) - Purple (ignition) - Yellow / Red (start) - Black (ground) -  Black / Yellow (magneto) - Yellow / Black...

4 Position 4 Terminal Plastic Construction Ignition Switch for Boats

Plastic construction Plastic face nut with dust cover 4 positions: Accessory - Off - Ignition - Start 4 screw terminals Ignition circuit rated 15 Amps @ 12 Volts Solenoid circuit rated 13 Amps @ 12 Volts Accessory circuit rated 15 Amps @ 12...